Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 92 items
Design and manufacture of local exhaust systems, free shape design, short delivery time.
We will undertake the exhaust air volume calculation based on necessary regulations such as the Organic Law and the Specialization Law, as well as the duct piping construction for local exhaust systems.
![[Case Study] We provide comprehensive construction from explosion-proof rooms to exhaust systems!](https://image.www.ipros.com/public/product/image/eac/2000196899/IPROS3098365119129389328.jpg?w=280&h=280)
We will carry out the entire construction from the explosion-proof room to the exhaust system!
While the cleaning process for base pharmaceuticals is expanding beyond the initial plan, the exhaust equipment, such as ventilation fans, is insufficient. Therefore, there has been a request to partition the work space and introduce suitable working conditions and ventilation equipment. Issues: 1. The exhaust system is not fully effective, which may allow the odors from the chemicals used to spread to other processes, worsening the working environment. 2. The usage exceeds fire safety regulations, necessitating explosion-proof measures. 3. To avoid deteriorating work efficiency, a large enclosure is desired.
![[Emission Standards Compliance, etc.] Special Vehicle Manufacturer](https://image.www.ipros.com/public/product/image/218/2000700597/IPROS86173505141926991963.jpeg?w=280&h=280)
Since the launch until now, there have been no issues with odors at all!
There was concern that the exhaust odor from the painting drying furnace at the newly established factory might negatively affect the neighboring area. The exhaust was cleaned using one Deodorizer DR-4W with a water film. Since the startup until now, there have been no issues with odor at all.
Water-soluble organic solvents such as PGMEA and acetone are captured without any issues!
It has been confirmed that water-soluble organic solvents such as PGMEA and acetone can be captured without any issues, and it has been found that a single layer of water film is sufficient for treatment, rather than requiring two layers.
![Explosion-proof stainless steel draft chamber [Custom case]](https://image.www.ipros.com/public/product/image/f08/2000419052/IPROS7661111136339614887.png?w=280&h=280)
We accept fully custom-made orders. We provide products made from materials such as stainless steel and PVC, tailored to your needs.
● This is a stainless steel draft chamber with excellent corrosion resistance, organic solvent resistance, and heat resistance. ● It is also possible to incorporate dry air and nitrogen gas piping, as well as leak detectors. ● By consolidating the control panel at the front, it takes work efficiency and safety into consideration.
![Stainless Steel Draft Chamber [Custom Case]](https://image.www.ipros.com/public/product/image/07d/2000419054/IPROS15217530336849464138.png?w=280&h=280)
We accept fully customized orders. We provide products made from materials such as stainless steel and PVC, tailored to your needs.
● This is a stainless steel draft chamber with excellent resistance to corrosion, organic solvents, and heat. ● It is also possible to incorporate dry air and nitrogen gas piping, as well as leak detectors. ● By consolidating the control panel at the front, it takes work efficiency and safety into consideration.
![Stainless Steel Draft Chamber [Custom Case]](https://image.www.ipros.com/public/product/image/ef5/2000419055/IPROS15179238871200861966.jpg?w=280&h=280)
We accept fully customized orders. We provide products made from materials such as stainless steel and PVC, tailored to your needs.
● This is a stainless steel draft chamber with excellent corrosion resistance, organic solvent resistance, and heat resistance. ● It is also possible to incorporate dry air and nitrogen gas piping, as well as leak detectors. ● By consolidating the control panel at the front, it takes into consideration work efficiency and safety.
High-temperature oxidative decomposition direct combustion deodorization device
By heating the odorous gas to approximately 650°C to 800°C, the odor components contained in the exhaust gas are oxidized and decomposed at high temperatures, converting them into harmless components! A high deodorization efficiency is achieved, and it is a reliable direct combustion deodorization device. 【Features】 ○ The equipment is compact and the installation cost is low. ○ There is little degradation in deodorization efficiency over time. ○ It can handle most organic substances, making it highly versatile. ○ There is little variation in deodorization efficiency due to fluctuations in odor sources. ○ Maintenance is easy, and there is no need for regular replacement parts.
Compact and high-efficiency heating equipment that protects the Earth, even at low cost! Easy to handle too!
The "Direct Combustion Type (Deodorization Furnace)" is an exhaust gas treatment device that can handle high-concentration exhaust gas treatment by passing it through an atmosphere temperature of 700 to 800°C. By adding a highly efficient heat exchanger, clean exhaust gas reuse is possible. In addition, we also offer "Catalytic Type," which allows for low-temperature treatment and excellent cost performance, and "Heat Storage Type," which features large-capacity exhaust gas treatment and high heat recovery efficiency. 【Features of Direct Combustion Type (Deodorization Furnace)】 ■ High-concentration exhaust gas treatment ■ Versatile method ■ Easy to handle ■ Small installation space ■ Exhaust gas reuse *For more details, please refer to the PDF materials or feel free to contact us.
Functions that enhance safety, comfort, and economy have come to fruition!
The "Tad Chamber" is a new concept draft chamber that enhances the safety and comfort of operators by preventing the leakage of toxic gases with low air volume, in addition to the push air supplied from conventional side panels and the front working area, by also providing support air from slits with a double-structured balance door. In addition to safety provided by multi-support air, it is equipped with features that enhance efficiency and cost-effectiveness on site, such as a touch-operated control panel, bright and easy-to-see LED lighting, and airflow adjustment functions. Moreover, since air does not directly hit the operator, comfortable work can be performed. 【Features】 ■ Outstanding comfort ■ High safety ■ Excellent cost-effectiveness *For more details, please refer to the catalog or feel free to contact us.
Lightweight, small space, compact!
The "Horizontal Type/SYS-E Model" is a newly developed exhaust gas treatment device with a horizontally oriented scrubber made of FRP molding. It is a compact package type that integrates the main body, blower, pump, and tank, reducing the height of the device. Compared to constant temperature PVC, it is made of FRP, which has superior strength and durability. Additionally, by finishing the FRP with a gel coat, the exterior is aesthetically pleasing, making it suitable for both indoor and outdoor installations. 【Features】 ■ Compact type ■ Low height of the device ■ Made of FRP with excellent strength and durability ■ Suitable for both indoor and outdoor installations *For more details, please refer to the catalog or feel free to contact us.
We can accommodate short delivery times and low costs! Custom specifications tailored to your request for experiments involving organic solvents and other flammable and explosive gases.
Our company manufactures draft chambers that enhance the safety and comfort of operators. They can be custom-made, allowing you to freely create the main unit according to your requirements! Since we have in-house production, we can deliver in a short time and at a low cost. 【Features】 ■ Custom-made ・・・ Made to order, so any request is welcome. It is also possible to have the entire exterior and interior made of stainless steel (SUS304). ■ In-house production ・・・ All processes from development to assembly, installation, and construction are carried out in-house, enabling short delivery times and low costs. ■ Small-batch production ・・・ As a small factory, we have many years of experience as a manufacturer. *For more details, please refer to our catalog or feel free to contact us.
Introducing the combination sash type draft chamber manufactured by Tada Seisakusho!
The "Combination Sash Type DFK" is a draft chamber manufactured by Tada Seisakusho. It is a type that has sliding glass installed in the sash. During experiments, it allows for partial opening without having to open the entire sash, which helps reduce unnecessary airflow changes. 【Features】 ■ Type with sliding glass installed ■ Can be used by opening only a part without opening the entire sash ■ Reduces unnecessary airflow changes ■ Touch-operated control panel (optional) *For more details, please refer to the PDF document or feel free to contact us.
Introducing the low working surface type draft chamber manufactured by Tada Seisakusho!
The "Low Work Surface Type DFL Model" is a draft chamber manufactured by Tada Seisakusho. It is a type with a lower work surface compared to the standard draft chamber. This design makes it easier to install and integrate large experimental equipment. 【Features】 ■ A type with a lower work surface compared to the standard draft chamber ■ Easier installation and integration of large experimental equipment ■ Touch panel operation (optional) *For more details, please refer to the PDF document or feel free to contact us.
Introducing the overhead type draft chamber with wet scrubber manufactured by Tada Seisakusho!
The "Wet-Type Scrubber Overhead Model DF-HW" is a draft chamber manufactured by Tada Seisakusho. This model features a wet scrubber cleaning tower installed on top of the standard type, with a circulation pump and cleaning solution tank stored inside the lower unit, requiring minimal installation space. It absorbs, neutralizes, and removes primarily chemically hazardous gases generated within the hood before exhausting them outdoors, thereby reducing the impact on the environment surrounding the laboratory building. Since the operation management of the wet scrubber can be done within the draft chamber, it is convenient for safety management. 【Features】 ■ Wet scrubber cleaning tower installed on top of the standard type ■ Type with circulation pump and cleaning solution tank stored inside the lower unit ■ Space-saving ■ Absorbs, neutralizes, and removes chemically hazardous gases before exhausting them outdoors ■ Reduces the impact on the environment surrounding the laboratory building *For more details, please refer to the PDF document or feel free to contact us.
Introducing the overhead type draft chamber with a dry scrubber manufactured by Tada Seisakusho!
The "Dry Type Scrubber Overhead Type DF-HD" is a draft chamber manufactured by Tada Seisakusho. It is a type that has a dry scrubber installed on the top surface of the standard type. It adsorbs and removes harmful gases, primarily organic solvents generated inside the hood, with activated carbon before exhausting them outdoors, thereby reducing the impact on the environment around the laboratory building. The operation management of the dry scrubber can be done within the draft chamber, making it convenient for safety management. 【Features】 ■ A type that has a dry scrubber installed on the top surface of the standard type ■ Adsorbs and removes harmful gases with activated carbon before exhausting them outdoors ■ Reduces the impact on the environment around the laboratory building ■ Convenient for safety management ■ Touch panel operation (optional) *For more details, please refer to the PDF document or feel free to contact us.
Introducing a walk-in type draft chamber that can accommodate large experimental equipment and devices. It smoothly exhausts gases generated on the floor!
The "Walk-in Type DFW Model" is a draft chamber manufactured by Tada Seisakusho. The interior of the draft chamber has sufficient effective height from the floor, making it easy to assemble large devices and equipment inside the hood or to move externally assembled equipment into the hood. Thanks to its unique airflow design, gases generated at the floor are smoothly exhausted. Custom designs are available to meet specific requirements, including all stainless steel or explosion-proof specifications. 【Features】 ■ The interior of the draft chamber has sufficient effective height from the floor. ■ Easy assembly of large devices and equipment inside the hood. ■ Easy to move externally assembled equipment into the hood. ■ Gases generated at the floor are smoothly exhausted. ■ Touch panel operation (optional). *For more details, please refer to the PDF document or feel free to contact us.
Introducing the interior stainless steel draft chamber manufactured by Tada Seisakusho!
The "Interior Stainless Steel Type DF-IS Model" is a draft chamber manufactured by Tada Seisakusho. The main body is made of steel, and the exterior is finished with chemical-resistant baked paint. The interior is entirely made of stainless steel (SUS304), and the work surface is flat, making it suitable for experiments using organic solvents. It is also possible to have the work surface in a tank style. 【Features】 ■ The main body is made of steel ■ The exterior is finished with chemical-resistant baked paint ■ The interior is entirely made of stainless steel (SUS304) ■ Suitable for experiments using organic solvents ■ The work surface can also be made in a tank style ■ Touch panel operation (optional) *For more details, please refer to the PDF materials or feel free to contact us.
Introducing the all-stainless steel draft chamber manufactured by Tada Seisakusho!
The "All Stainless Steel Type DF-AS Model" is a draft chamber manufactured by Tada Seisakusho. Both the exterior and interior of the draft chamber are made entirely of stainless steel (SUS304). It is highly durable and suitable for experiments using organic solvents. The water supply and gas supply are designed for remote operation from the outside, considering safety during use. It is also possible to manufacture explosion-proof models. 【Features】 ■ Entirely made of stainless steel (SUS304) for both exterior and interior ■ Highly durable ■ Suitable for experiments using organic solvents ■ Water and gas supply operated remotely from the outside ■ Explosion-proof models can also be manufactured ■ Touch panel operation (optional) *For more details, please refer to the PDF document or feel free to contact us.
Introducing the tabletop draft chamber manufactured by Tada Seisakusho!
The "Tabletop Type DFT Model" is a draft chamber manufactured by Tada Seisakusho. It is a type that can be installed on the tabletop of a laboratory bench. Since it has the same design as the standard type, it has equivalent exhaust performance. 【Features】 ■ Type that can be installed on the tabletop of a laboratory bench ■ Same design as the standard type ■ Equivalent exhaust performance ■ Touch panel operation (optional) *For more details, please refer to the PDF document or feel free to contact us.
Introduction to the standard doorless type draft chamber manufactured by Tada Seisakusho!
The "DFO Type without Standard Door" is a draft chamber manufactured by Tada Seisakusho. The main body is made of steel with a chemical-resistant baked coating, and the interior uses non-asbestos special resin boards, ensuring heat and chemical resistance. The work surface is customizable (options include epoxy, stainless steel, rigid PVC, etc.). Connections for water supply and drainage, electricity, and gas are made at the lower unit, allowing for easy maintenance and inspection. This type features an open lower unit space compared to the standard type. 【Features】 ■ The main body is made of steel with a chemical-resistant baked coating ■ The interior uses non-asbestos special resin boards ■ Consideration for heat and chemical resistance ■ Easy maintenance and inspection ■ An open lower unit space compared to the standard type ■ Touch panel operation (optional) *For more details, please refer to the PDF materials or feel free to contact us.
Introducing the interior PVC type draft chamber manufactured by Tada Seisakusho!
The "Interior Vinyl Type DF-IP Model" is a draft chamber manufactured by Tada Seisakusho. The main body is made of steel, and the exterior is finished with chemical-resistant baked paint. The interior is made entirely of rigid PVC, making it convenient for work involving acid treatments and other chemicals. Production of PVC sashes is also possible. 【Features】 ■ Main body is made of steel ■ Exterior is finished with chemical-resistant baked paint ■ Interior is made entirely of rigid PVC ■ Convenient for work involving acid treatments and other chemicals ■ Production of PVC sashes is also possible ■ Touch panel operation (optional) *For more details, please refer to the PDF document or feel free to contact us.
Can accommodate short delivery times and low costs! Custom specifications tailored to your request for experiments involving organic solvents and other flammable explosive gases.
At Tada Seisakusho, we manufacture draft chambers that enhance the safety and comfort of operators. We can freely create the main body according to your specifications! Since we have in-house production, we can deliver in a short time and at a low cost. We offer custom-made options, allowing for production in dimensions that fit your installation location. 《Comprehensive catalog of draft chambers is currently available! Please download it from below!》 【Features】 ■ Custom-made Since we produce to order, any request is welcome. It is also possible to have the entire exterior and interior made of stainless steel (SUS304). ■ In-house production We handle everything from development to assembly, on-site installation, and construction in-house, enabling short delivery times and low costs. ■ Small-batch production As a small factory, we have numerous achievements as a long-standing manufacturer. *For more details, please refer to the PDF materials or feel free to contact us.
Compact design suitable for installation on rooftops! Horizontal type exhaust gas treatment device.
In chemical experiments, particularly those involving organic compounds, fume hoods generate unpleasant gases such as organic solvents. This product is a device that adsorbs and removes these gases primarily using a filter made of activated carbon. By using it, we can prevent air pollution around laboratory buildings and contribute to environmental conservation. Additionally, a pre-filter is installed near the exhaust gas inlet, ensuring that dust does not adhere to the activated carbon, resulting in better performance. 【Features】 ■ Adsorbs and removes unpleasant gases such as organic solvents using a filter made of activated carbon ■ Prevents air pollution around laboratory buildings and contributes to environmental conservation ■ Ensures good performance by preventing dust from adhering to the activated carbon ■ Suitable for the discharge of low-concentration organic gases ■ Operates with a small amount of activated carbon filling and low pressure loss *For more details, please refer to the PDF document or feel free to contact us.
![[Case Study] Chemical Manufacturer Draft Chamber](https://image.www.ipros.com/public/product/image/64c/2000491375/IPROS43276261384730954298.png?w=280&h=280)
Here is an example of a chemical manufacturer who was unsure about what specifications to choose and decided to introduce a draft chamber.
At Tada Manufacturing, we design, manufacture, construct, and sell various equipment related to research, inspection, medicine, and educational facilities, including draft chambers, clean environment equipment, and custom-made products. Here is an example of a chemical manufacturer that introduced a draft chamber. ■Challenge They were looking for a draft chamber but were unclear about the specifications and didn't know what to do. ■Proposed Solution We assessed their usage conditions and proposed a plan tailored to their site, which was possible because it was custom-made. Proposed products: Stainless steel draft chamber PVC draft chamber, etc. ■Result We were able to uncover the customer's latent needs and solidify a concrete proposal, leading to the successful introduction of equipment suitable for their intended use, resulting in their satisfaction. *In addition to stainless steel and PVC draft chambers, we can also accommodate accessories such as exhaust gas treatment layers.
Can be installed in patient rooms, examination rooms, break rooms, etc., to prevent hospital-acquired infections! Equipped with casters for easy mobility.
Tada Manufacturing's "Infection Control Unit" does not require special electrical work and can be used with a household power supply (AC100V). It is effective for preventing infections such as influenza and viruses. 【Features】 ■ Can be installed in hospital rooms to prevent hospital-acquired infections ■ Creates negative pressure in the room and exhausts air outdoors via ducts *Some models can also be circulation type ■ Exhaust air is sterilized with a HEPA filter ■ Can be easily installed in existing rooms ■ Equipped with casters for easy mobility 【Main Specifications】 Product Name: Infection Control Exhaust Unit Airflow: Maximum airflow 16m3/min Size: W850×D650×H1780mm *Excluding damper 【Filter Specifications】 ■ Dust collection efficiency: 99.99% or more for 0.3μm particles ■ Main Filter: HEPA filter (sterilizing enzyme filter) ■ Pre-filter: Non-woven fabric filter *For more details, please contact us or download the PDF.
Supports low cost and short delivery times! Both exterior and interior are made entirely of stainless steel, offering excellent durability, making it suitable for experiments using organic solvents.
The "All Stainless Steel Type / DF-AS Model" is a draft chamber made entirely of stainless steel (SUS304) for both the exterior and interior. Its all-stainless construction provides excellent durability, making it suitable for experiments using organic solvents. Since we handle all aspects of development, design, manufacturing, assembly, and on-site installation and construction in-house, we can offer the introduction of all-stainless draft chambers at a lower cost than other companies. We can manufacture the chambers freely according to the installation location, producing each one to order with varying widths and depths. 【Features】 ■ Entirely made of stainless steel (SUS304) for both exterior and interior ■ Water and gas supply... remote operation from the outside (considering safety during use) ■ Explosion-proof models can also be manufactured *For more details, please refer to the catalog or feel free to contact us.
Finally achieving the long-sought balance of comfort and safety! A new concept draft chamber.
The "TaD CHAMBER" is a product designed to prevent the leakage of toxic gases with low airflow, enhancing the safety and comfort of operators. Unlike typical air curtain products that blow air from the top of the chamber, it supplies air through slits in the front glass door. This design ensures that air does not directly hit the operators and does not disrupt the indoor air conditioning, allowing for comfortable work conditions. 【Features】 ■ Exceptional Comfort - Air is supplied through slits in the front glass door - Air does not directly hit the operators - Comfortable work can be conducted without disturbing the indoor air conditioning *For more details, please refer to the PDF document or feel free to contact us.
